Part Number Hot Search : 
CD5235 MJF13009 SEL1410 CM104 SBL1040 2405DH TW9910 EL5261
Product Description
Full Text Search
 

To Download 15-21SURCS530-XXTR8 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 www..com
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 1206 Package Chip LED
15-21SURC/S530-XX/TR8
Features
Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment.Compatible with infrared and vapor phase reflow solder process. Mono-color type.
Descriptions
The 15-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Automotive: backlighting in dashboard and switch. .com Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
DataShee
Device Selection Guide
Chip Material AlGaInP Emitted Color Hyper Red Lens Color Water Clear
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065
http://www.everlight.com Prepared date: 07-01-2003
Rev 1.1
Page: 1 of 9
Prepared by: Jessica Chang
DataSheet 4 U .com
www..com
EVERLIGHT ELECTRONICS CO.,LTD.
15-21SURC/S530-XX/TR8
Package Outline Dimensions
t4U.com
.com
DataShee
Notes: Tolerances Unless Dimension 0.1mm, Unit = mm
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065
http://www.everlight.com Prepared date: 07-01-2003
Rev 1.1
Page: 2 of 9
Prepared by: Jessica Chang
DataSheet 4 U .com
www..com
EVERLIGHT ELECTRONICS CO.,LTD.
15-21SURC/S530-XX/TR8
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Symbol VR IF Topr Tstg Tsol ESD Pd IF (PEAK) Rating 5 25 -40 ~ +85 -40~ +90 260 (for 5 second) Unit V mA V mW mA
2000
60 60
Electro-Optical Characteristics (Ta=25)
Parameter
t4U.com
Symbol
*Chip Rank
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
Viewing Angle Peak Wavelength
Dominant Wavelength
21/2 p d VF IR
.com A2 15 A3 36 A4 49 A5 60 A6 72 -----------------
38 54 74 92 111 140 632 624 20 2.0 -----
------------------------------------2.4 10
DataShee
mcd
IF=20 mA
deg nm nm nm V A
IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V
-----------------
-----------------
Spectrum Radiation Bandwidth Forward Voltage
Reverse Current
*15-21SURC/S530-XX/TR8 Chip Rank
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065 http://www.everlight.com Prepared date: 07-01-2003 Rev 1.1 Page: 3 of 9 Prepared by: Jessica Chang
DataSheet 4 U .com
www..com
EVERLIGHT ELECTRONICS CO.,LTD.
15-21SURC/S530-XX/TR8
Typical Electro-Optical Characteristics Curves
t4U.com
.com
DataShee
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065
http://www.everlight.com Prepared date: 07-01-2003
Rev 1.1
Page: 4 of 9
Prepared by: Jessica Chang
DataSheet4 U .com
www..com
EVERLIGHT ELECTRONICS CO.,LTD.
15-21SURC/S530-XX/TR8
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
t4U.com
Reel Dimensions
.com
DataShee
Note: Tolerances Unless Dimension 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065
http://www.everlight.com Prepared date: 07-01-2003
Rev 1.1
Page: 5 of 9
Prepared by: Jessica Chang
DataSheet 4 U .com
www..com
EVERLIGHT ELECTRONICS CO.,LTD.
15-21SURC/S530-XX/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
t4U.com
.com
DataShee
Note: Tolerances Unless Dimension 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moistue-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065
http://www.everlight.com Prepared date: 07-01-2003
Rev 1.1
Page: 6 of 9
Prepared by: Jessica Chang
DataSheet 4 U .com
www..com
EVERLIGHT ELECTRONICS CO.,LTD.
15-21SURC/S530-XX/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 240 5 5 sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min
.com
Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 Pcs. 0/1
2
Temperature Cycle
300 Cycles 22 PCS.
0/1
3
t4U.com
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
0/1
4 5 6 7
Temp. : 100 Temp. : -55 IF = 20 mA 85/RH85%
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
DataShee
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065
http://www.everlight.com Prepared date: 07-01-2003
Rev 1.1
Page: 7 of 9
Prepared by: Jessica Chang
DataSheet 4 U .com
www..com
EVERLIGHT ELECTRONICS CO.,LTD.
15-21SURC/S530-XX/TR8
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 for 24 hours.
t4U.com
.com
DataShee
3. Soldering Condition 3.1 Lead solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 Reflow soldering should not be done more than two times. 3.4 When soldering, do not put stress on the LEDs during heating. 3.5 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065
http://www.everlight.com Prepared date: 07-01-2003
Rev 1.1
Page: 8 of 9
Prepared by: Jessica Chang
DataSheet 4 U .com
www..com
EVERLIGHT ELECTRONICS CO.,LTD.
15-21SURC/S530-XX/TR8
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
t4U.com
.com
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. .com Device No: DSE-151-065
http://www.everlight.com Prepared date: 07-01-2003
Rev 1.1
Page: 9 of 9
Prepared by: Jessica Chang
DataSheet 4 U .com


▲Up To Search▲   

 
Price & Availability of 15-21SURCS530-XXTR8

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X